• Verify Rep

Change the Batteries

If your sensor’s batteries are low, complete the following steps to replace them:

Key Fob 2GIG-Key2
1Use a small Phillips head screwdriver to remove the screw located on the back of the key fob toward the bottom
2Pry the key fob cover apart with a small flathead screwdriver
3Slide the battery out of the battery clip
4Remove the old battery and replace with a CR2025 battery, positive side up
5Snap the key fob together and replace the screw
6Safely dispose of the old batteries
Key Fob V-SKey1
You may have a next gen key fob if it is more oval and is black and silver. If you have a next gen key fob, follow the steps below:
1Remove the top cover of the key fob by inserting a dime or penny into the slot located on the bottom of the pendant. Twist the coin to pop the cover off.
2Remove the old battery and replace it with the new CR2032 battery, positive side facing up. Remeber to safely dispose of the old battery.
3Replace the cover and make sure it snaps shut with no gaps.

Did this answer your question?

For more help, chat or send us a message.

Call 855.898.8908