• Verify Rep

Adjust Sensitivity (2GIG-PIR1)

To change the sensitivity settings of your motion detector, complete the following steps:

1Be sure that your system is disarmed and go to your motion detector
2 Go to your motion detector and remove the sensor from the mounting bracket on your wall using a screwdriver. On the back of the sensor, you’ll see two black switches
3 Pull the switch out and move it to the appropriate setting. Under the PET setting, you can select either 15K or 25K depending on the size of your animal. Under the SENS setting, you can select HIGH or LOW depending on the level of sensitivity that you want. The lowest sensitivity setting available is the 25K PET and LOW SENS setting
4 When you’re finished changing the settings, put your sensor back on the mounting bracket

Did this answer your question?

For more help, chat or send us a message.

Call 855.898.8908