• Verify Rep

Silence Trouble Alerts at Night

During the installation, your system is configured by your technician to suppress the trouble alert siren between 10:00 p.m. to 9:00 a.m. Any trouble alerts will still be displayed and reported (if enabled), but the siren will not beep during nighttime hours. Some trouble conditions may clear automatically while other trouble conditions may require service to correct. If a trouble condition still exists after 9:00 a.m., the siren beeps to indicate trouble. This option is configurable and can be disabled by your technician.

Trouble alerts can be anything from a loss of supervision to low battery alerts. To clear the alert, follow these steps on your panel:

1Press the home button
2In the top right corner, tap the yellow hazard sign icon
3Tap on the alert to read the message fully, and correct as necessary

4Tap 'OK' on the panel to silence the beeping. If the trouble alert has not been fixed, such as batteries being replaced, the panel will start to beep again after 8 hours

Did this answer your question?

For more help, chat or send us a message.

Call 855.898.8908